|
- Well-proven stellite® tipping system with excellent reputation.
- The stellite® is welded on the saw by resistance welding method.
- The structural condition of the stellite® does not change during welding. Cracks and holes in the stellite® are thus avoided.
- The stellite® is welded horizontally and the tip size can be adjusted in width.
- The stellite® bar is manually advanced and is cut off by a cutting off wheel after welding.
- Pre-shaped (prism) stellite® P 5,0 and P 6,5 and round stellite® from 3,2 to 8,0 mm dia can be used.
- No need for elaborate saw preparation and grinding of the saw tip before tipping.
- New tips can be directly welded onto existing tips.
|
|
- Well-proven stellite® tipping system with excellent reputation.
- The stellite® is welded on the saw by resistance welding method.
- The structural condition of the stellite® does not change during welding. Cracks and holes in the stellite® are thus avoided.
- The stellite® is welded vertically and the tip size can be adjusted in length from 4 mm to 10 mm.
- Stellite® is picked-up from the magazine (5 rods 1000 mm in length each) and is then cut off by a cutting off wheel.
- Pre-shaped (square) stellite® form 2,5 to 6,5 mm and round stellite® from 3,2 to 6,4 mm dia can be used.
- No need for elaborate saw preparation and grinding of the saw tip before tipping.
- New tips can be directly welded onto existing tips.
|
