GRINDING SOLUTIONS FOR BAND AND GANG SAWS

SHARPENING, MACHINING AND MAINTAINING BAND SAW BLADES CORRECTLY

Measuring, stellite tipping, straightening, tensioning, levelling, swaging and sharpening: These are the keys in the field of precision machining of band and gang saw!

Modular solutions from ISELI effectively realize these key factors with state-of-the-art machine and system control technology. With maximum productivity, they ensure that a saw shop is more profitable at manufacturers of tools, service providers as well as for sawmills With the world´s largest machine program for band and gang saws we set standards for precision, reliability and efficiency. Our modular machine solutions realize these key factors effectively and practically and ensure lasting product quality and cost advantage !

Band saws are highly sensitive. If maintained incorrectly, they may break. The reason for this is that band saws are subject to a constant bending cycle. This can cause hairline cracks to form in the tooth gullet, the area of highest tensile stress. If the saw is not resharpened on time, these cracks grow and cause breakages. To prevent this, the whole profile, i.e. all of the teeth (irrespective of their shape), of band saws made of CV steel and stellited band saws must be regularly resharpened – even when the usual degree of bluntness has not been reached in some places.


R410-R510 / WVB360

Levelling bench and rolling machine for manual straightening and tensioning of band and gang saw blades

ISELI R 410 / WVB 360, Manuelle Richtbank und Walzmaschine

Description

The dressing bench R510 and roller unit WVB360 lets you straighten and tension band and gang saw blades up to a width of 360 mm . A robust design, perfect results, simple operation and a high level of safety were key priorities in the development of this machine, and pay high dividends in day-to-day operation. The loading of the saw blade has been simplified in that the upper part of the rolling unit no longer has to be opened and closed, and the rolling pressure can be accurately regulated via the large, ergonomic clamping lever. The device also boasts a range of practical details as follows: A large anvil plate in wear-free tool steel with vibration dampers, practical storage areas for measuring and machining tools, an integrated light box for inspecting the top straightness and extendable roller carriers. 

Highlights Levelling bench

Levelling bench for saw blades of 6 to 12 m of length, consisting of:

  • 5 supports with rollers
  • 4 movable deflection rollers
  • 1 Adjustable counter roll
  • 5 additional rollers with rest for the wooden table wooden part complete

Highlights rolling machine

  • MIG process; welding with inert gas
  • Flexible welding plate for welding of different angles: 90°, 75° and 60°
  • Preheating and annealing on the same welding space
  • Temperature adjustable by Thermostat
Bandsägeblätter: 
R4106.0 - 10.0 M
R510

9.0 - 12.0 M

Blattbreiteabhängig Ambossblatte
  
Ambossplatte: 
Variante 1220 x 1000 x 60 mm
Blattbreitebis 230 mm
Variante 2700 x 270 x 60 mm
Blattbreitebis 300 mm
  
Walzeinheit: 
Verstellbereichca. 380 mm
Walzgeschwindigkeitauf Wunsch
  
Elektrische Anschlusswerte:      
Spannung400V, 3PH, 50Hz
  • Stoppeinheit für Räumerschneiden (bei Kreissägen)
  • Ersatz Spannrollen
  • Ständer
  • Halogen-Maschinen-Leuchte
  • Richtlineale / Haarlineal
  • Kreuz- und Ballhammer
  • Ambossplatte